Home / Products / Epoxy Polyester Powder Coating / White Sandy texture Epoxy Polyester powder coating for metal products Pintura En Polvo


Share to:

White Sandy texture Epoxy Polyester powder coating for metal products Pintura En Polvo

This series of products are mainly made of epoxy resin and polyester resin.

For they have the double advantage of epoxy and polyester , it has the good levelling property, ornamental, mechanical property and superior corrosion resistance, and be widely used in many fields

  • EPRal 9003/9016 Sandy texture


Product Description

 Application fields:

application Industries 2


quality assurance

Loading Container

Product Description:

Powder coating is a solid powdery synthetic resin coating composed of solid resin and pigments, fillers and additives. Unlike ordinary solvent-based paints and water-based paints, its dispersion medium is not solvent and water, but air. It has the characteristics of no solvent pollution, 100% film formation and low energy consumption.   



· Pipeline industry: anti-corrosion pipeline, oil pipeline, sewage pipe, vessel water pipe, gas pipe and valves etc.

· Metal furniture: Steel furniture, documents cabinets etc.

· Kitchen utensils: gas cylinder, gas cooker, kitchen ventilator etc.

· Construction industry: door lock, rebar and steel plate.

· Electrical industry: Electronic spare parts, winding coil, and insulation coating of the rotator etc.


Products Series:

· Available in standard curing and lower temperature curing

· Available in multi-colors, different gloss level such as high gloss ( above 90°), flat gloss( 70-80°), semi gloss ( 10-60°), matt( below 10°), particular color and gloss is made according to customers requirements.

· Available in various kinds of art textures, such as sandy, wrinkle, lanose grain, ha

mmer tone, metallic effect etc.

 Physical Property:

Specific gravity: 1.11.8g/cm(varied with different color and gloss)

Particle size: average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.


Curing Temperature:

Standard type: 180℃/15 minutes

Or 160℃/20 minutes, 200℃/10 minutes if customer require



The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:



Chromate conversion


Zinc phosphate

Zinc coated steel

Zinc phosphate or chromate conversion


Average Coating Rate:

A. Smooth Surface:
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)

B. Texture Surface:

5-7/KG,film thickness is about 80-120μm


 Film Performance:


Test Item

Test standard and Method


Test index

Impact resistance

GB/T 1732 -1993




GB/T 9286 - 1998


Class 0


GB/T 6742-1986



Pencil hardness

GB/T 6739-1996



Cupping test

GB/T 9753-1988



Salt spray resistance

GB/T 1771-1991


>400 Hours

Heat & humidity resistance

GB/T 1740-1979


>500 Hours,film gloss slightly lose

Note: 1. Above test are using 0.30mm thickness degreased, rust removed cold rolling steel plate, film thickness is 60-80um.

2. Film performance may slightly decrease with gloss decrease.



Carton packing with liner of double polyethylene bags, Net weight 20kg or 25kg each.


Storage and shippment

The bulk powder paint  must be stored in ventilated, dry and clean room with temperature below 25oC, Keep it away from fire, heat,and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment.


Health and safety

The bulk powder paint is no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.



Q1: Are you a factory or trading company? 

A1: We are a factory manufacturing products for over 28 years in Jinhu, China. 

Q2: Why should I use powder coatings? 

A2: There are some advantages of powder coatings. For example, they are harmless to humans. In addition, they also have resource efficiency and reduction of environmental pollution. After being coating, it forms a lasting film to protect the surface of the items. 

Q3: Why should I buy from you not from other suppliers? 

A3: We have a professional group of R&D. According to our clients’ preference, we can adjust the formula to change the color, luster, appearance, and even metal texture and special patterns. Besides, we offer complete services before and after your purchasing, including color proofing, technical analysis, application recommendations, and after-sales services. 

Q4: How about the delivery date? 

A4: The delivery date will be within 15 days. 

Q5: Can you offer the sample of my ideal color? 

A5: Yes, we are pleasure to do. Please contact us to get the information. Besides, we can provide some color cards you have ordered in the delivery. 

Q6: If there is no my ideal color, what can you offer me? 

A6: We have the color proofing service, if any demands, feel free to contact us.

If any other questions, please feel free to contact us. We are glad to respond

Contact Information:

Ms. Susie Xie 

Tel: 86 25 83313610   Mob/Whatsapp/Wechat: 86 17751006340

Email: jh@colorpowdercoating.com| Web: www.fhpowdercoating.com