Home / Products / Polyester Powder Coating / Outdoor use Blue sandy Powder coating powder Pintura en polvo powder paint


Share to:

Outdoor use Blue sandy Powder coating powder Pintura en polvo powder paint

This series of products are mainly made of Polyester resin.

For they have the double advantage of Polyester , it has the good weatherability, levelling property, ornamental, mechanical property and superior corrosion resistance, and be widely used in many fields
  • Ral 5015/5012/5017 blue sandy


Product Description

      Colors : RAL5015/5012/5017

  1. Surface:  Sandy Texture 

  2. Gloss: matt

  3. Chemistry : Polyester

  4. Use :Indoor or outdoor use


  1. Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.

  2. Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.

  3. Optimal film thickness : 80 -110 um

  4. The size of wrinkle pattern obtained depends on the coating thickness.

  5. Excessively thin or thick films will not give a satisfactory finish.

Average coverage:
7-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).

  Carton packaging, lined with polyethylene bag, net weight 20 or 25kg.

Storage requirements:
  Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and safety:
 This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.

Coating performance

Coating performance
Test items Inspection standards Test indicators
High light Glazed/Matte/Low light
Impact resistance ISO6272 GB/T1732-1993 50kg/cm 40kg/cm
Cupping test ISO1520 GB/T9753-1988 8mm 7mm
The adhesion (grid method) ISO2409 GB/T9286-1998 0
Bending ISO1519 GB/T6742-1986 2mm 3mm
Pencil Hardness ASTMD3363 GB/T6739-1996 1H-2H
Salt spray test ISO7253 GB/T1771-1991 >500 hours
Damp heat test ISO6270 GB/T1740-1979 >1000 hours
Heat resistance 110°C/24 hours(white) Good gloss retention,E≤0.3-0.4
Florida weathering exposure ISO2810 South 45 °,12mons Gloss retention≥50%
Artificial accelerated aging 60°C/8hours + 50°C/4hours condensing,cycle for 500hours Gloss retention≥50%                         Color stability:E≤0.35

Annotate: 1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.

2.The above coating performance may be lower as shiny and slightly lower.

Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.

Contact Information:

Ms. Susie Xie

Tel: 86 25 83313610   Mob/Whatsapp/Wechat: 86 17751006340

Loading Container