Home / Products / Epoxy Polyester Powder Coating / Electrostatic spray paint White sandy hybrid Powder coating powder Pintura en polvo

loading

Share to:

Electrostatic spray paint White sandy hybrid Powder coating powder Pintura en polvo

This series of products are mainly made of epoxy resin and polyester resin.

For they have the double advantage of epoxy and polyester , it has the good levelling property, ornamental, mechanical property and superior corrosion resistance, and be widely used in many fields
Availability:
Quantity:
  • Black 9016/9003/9010 sandy

  • FEIHONG

Product Description

COLORS AVAILABLE

RAL colors powder coating

Pantone colors powder coating

Color-matching regarding customer requirement is available



GENERAL TYPES for powder coating

Polyester /Hybrid powder coating

Epoxy Powder coating color

Metallic powder coating color

Hammer tone color powder coating

Texture color powder coating powder paint

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color etc



PHYSICAL PROPERTIES for powder paint

Specific gravity :1.2 ~ 1.5g/cm3 up to vary colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~ 27 mm



CURING CONDITIONS

180 °C ~ 200 °C (workpiece surface temperature), 10-15 minutes or on base of customer's requirement



AVERAGE COVERAGE

8-12 square meters / kg, thickness 60-90 microns (100% of the powder coating utilization rate)



PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25Kg net weight.

Powder Coating Application
Powder Coating for aluminium extrusion
Powder Coating for racking system
Powder Coating for electric cabinet
Powder Coating for gas cylinder
Powder Coating for exterior fence
Powder Coating for metal furniture



STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 12 months.Over the storage period may be re-tested and the results were consistent with, can still be used.


HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating



Mechanical property

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993, AS3715 2.8

>50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520

Erichsen, ISO1520

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi

1H or 2H pass

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

GB/T17740-79(89),1000 H

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours

Without air bubbles, the surface without damage

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

Uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of

2 hours

No bubble, not falling,slightly lose light

We provide free samples to you.


Loading Container



quality assurance


FAQ

Q1: Are you a factory or trading company?

A1: We are a factory manufacturing products for over 28 years in Jinhu, China.


Q2: Why should I use powder coatings?

A2: There are some advantages of powder coatings. For example, they are harmless to humans. In addition, they also have resource efficiency and reduction of environmental pollution. After being coating, it forms a lasting film to protect the surface of the items.


Q3: Why should I buy from you not from other suppliers?

A3: We have a professional group of R&D. According to our clients’ preference, we can adjust the formula to change the color, luster, appearance, and even metal texture and special patterns. Besides, we offer complete services before and after your purchasing, including color proofing, technical analysis, application recommendations, and after-sales services.


Q4: How about the delivery date?

A4: The delivery date will be within 15 days.


Q5: Can you offer the sample of my ideal color?

A5: Yes, we are pleasure to do. Please contact us to get the information. Besides, we can provide some color cards you have ordered in the delivery.


Q6: If there is no my ideal color, what can you offer me?

A6: We have the color proofing service, if any demands, feel free to contact us.


If any other questions, please feel free to contact us. We are glad to respond


Contact Information:

Ms. Susie Xie

Tel: 86 25 83313610   Mob/Whatsapp/Wechat: 86 17751006340

Email: jh@colorpowdercoating.com| Web: www.fhpowdercoating.com


Previous: 
Next: