Tiny Textured Wrinkle Structure Epoxy Polyester Hybid Pinturs En Polvo Powder Coating

Tiny Textured Wrinkle Structure Epoxy Polyester Hybid Pinturs En Polvo Powder Coating

Thermosetting Antique Silver Vein Hammer Texture Powder Coating electrostatic spray powder coating

COLORS AVAILABLE

• RAL colors coating powder

• Pantone colors

• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating

• Epoxy Powder coating color

• Metallic powder coating color

• Hammer tone color powder coating

• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors

• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating.