RAL9003/90110/9016 Polyester White Powder coating powder Pintura en polvo powder paint

Main Properties:

Surface:  Wrinkle

Chemistry : Polyester

Use : Indoor or outdoor use

Application Schedule:

• Applied by electrostatic spraying gun that can provide negative tension of 60-80 kV.

• Curing schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.

• Optimal film thickness : 80 -110 um.

• The size of wrinkle pattern obtained depends on the coating thickness.

• Excessively thin or thick films will not give a satisfactory finish.

Average Coverage:

7-10m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).

Packing:

Storage Requirements:

Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and Safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.

Coating Performance:

Why Choose Our Products?

• We have our own factory. The good quality and the competitive is the advantage of our company.

• The material we choose is always good and products always come out with high quality.

• A trial order or sample orders are welcomed.

• Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.

• We will do our best to service you all the time if you have the further question.